How to Setup Multiple Administrators

Before you follow this guide, please read some alternatives about Smartlaunch System Setup as mentioned in our guide here.

Basically it is possible to have multiple Administrators in Smartlaunch which are connected into the same server.

Please follow steps below to set it up:

  1. Check your Server IP address and make sure it is connected to your Administrator. Please follow this guide to set it up.
  2. By following step number 1 you should able to connect you Administrator with the Server. If you have a problem about it please follow this guide.
  3. If your first Administator is already connected to the Server, please use the same steps to connected the second Administrator to the Server.
  4. Click on your Administrator module -> Utilities -> Preference -> General -> Connection:Server IP: set your Server IP address and the default port is 7831.Admin ID: set your Administrator ID. This is important because this setting will differentiate the first Administrator and the second one. So if you have multiple Administrator please setup the Administrator ID on each Administrator.

chantix buy onlinebuy ventolin inhalerbuy clindamycin

chantix buy onlinebuy ventolin inhalerbuy clindamycin